Gluing the hexapod legs to servo horns.
With battery power connected, so that the servos hold their neutral positions, put the horns
onto the servos so that the legs are as close as possible to neutral positions, as shown in the
picture. Fix them in place with the included screws, holding the legs as you tighten them so
that you do not apply torque to the fragile servo gears. Glue the Maestro to the back side of
the servos, flush with the bottom.
Attaching the legs and Maestro to the servos.
Sample Project: Simple Hexapod Walker
© 2001–2010 Pololu Corporation
3. Construction
Page 11 of 21
