62
Channel scan
Band Scan
Use the Scan function to locate active channes among the
memorized channels in one or more banks.
1. Press
Func MR
to select the Memory Read mode.
2. Press
Bank/Band
to select the preferred memory bank.
3. Set the squelch level to a point where the receiver is just
quiet.
4. Press
Scan/Src
. The receiver will begin scanning the se-
lected Band.
Notes:
•
If a signal is received, the receiver will remain on the ac-
tive channel for the duration of the ‘Busy Timer’ setting
in the Menu setup. If the ‘Busy timer’ is set to Busy the
receiver will stay on the active channel for as long as the
signal is present.
• To change the bank while searching, briefly press Band/Bank key.
•
To change the scan direction while scanning, rotate the control knob clockwise or counter
clockwise.
Full Scan
The Full Scan function scans the entire memorized channel range for signals.
1. Press
Func MR
to select the Memory Read mode.
2. Press
Bank/Band
to select the preferred memory bank.
3. Set the squelch level to a point where the receiver is just
quiet.
4. Press and hold
Scan/Src
for 2 seconds. The receiver will
begin scanning the entire full Bands.
Notes:
•
If a signal is received, the receiver will remain on the ac-
tive channel for the duration of the ‘Busy Timer’ setting
in the Menu setup. If the ‘Busy timer’ is set to Busy the
receiver will stay on the active channel for as long as the
signal is present.
• To change the bank while searching, briefly press Band/
Bank key.
•
To change the scan direction while scanning, rotate the
control knob clockwise or counter clockwise.
•
The full scan function works only within the Manual Memory Banks(00 through 39
Banks).
Содержание RX-1300
Страница 37: ...37 Note...
Страница 74: ...Importato e distribuito da Polmar srl polmar srl alice it www polmar biz...
