2.6 Mechanical dangers
WARNING!
Danger of injury due to rotating parts!
–
During operation, do not reach into the moving wheel
or tamper with the wheel.
–
Do not open covers and maintenance covers during
operation.
–
Make sure that the wheel is not accessible during
operation.
–
Pay attention to the after-run time: make sure that
no more components are moving before opening the
covers for maintenance purposes.
–
Switch off the fan before beginning any work on
moving components and secure it against being
switched back on. Make sure that all components
have come to a standstill.
–
This fan fulfills the requirements of EC-machinery
directive 2006/42/EC, when one of the following
requirements are secured:
–
The fan is attached at pressure and suction
side.
–
The fan is attached at pressure side and
equipped with safety devices (f.e. safety wire) at
suction side.
–
The fan is attached at suction side and equipped
with safety devices (f.e. safety wire) at pressure
side.
–
The fan is equiooed at pressure and suction side
with safety devices (f.e. safety wire) at pressure
side..
WARNING!
Danger of injury caused by heavy vibrations!
–
Do not take the vibration dampers out of operation.
–
Do not remain within the vibrating area during oper-
ation.
CAUTION!
Danger of injury due to sharp edges and pointed
corners!
–
Proceed carefully when working near to sharp edges
and pointed corners.
–
Wear protective gloves in case of any doubt.
Fan
Vibrations
Sharp edges and pointed corners
Safety
19.12.2012
12
Содержание CRJM
