background image

 

11 

 

rotating wheels and elements of drive system. 

 

Any  fall,  accident  or  other  external  forces  may  cause  damage  of  bicycle  components  that  are 
important  for  safety.  This  may  lead  to  dangerous  situations  during  the  ride,  accidents  and 
material  damage.  Do  not  use  your  bicycle  after  a  fall,  accident  or  if  it  has  been  affected  by 
external  forces.  Contact  your  service  workshop  immediately  after  a  fall  or  accident.  Use  your 
bicycle only when it has been properly repaired by the service workshop. 

 

A bike that is leaning against a house wall or garden fence may fall over when subjected to even 
small force. This may cause injury to people and animals and damage other objects. 

 

Park your bicycle only where it does not represent an obstacle or nuisance to other people and 
where  it  will  not  damage  other  objects.  Keep  children  and  animals  away  from  your  parked 
bicycle.  Do  not  park  your  bicycle  next  to  items  that  may  be  easily  damaged,  such  as  cars  and 
other similar items. 

 

In  the case  of  transporting  the  bicycles  with  the  use of  bicycle  racks, the  bicycle  parts may  be 
damaged. The damage of these parts may lead to dangerous situations during the ride, accidents 
and  material  damage.  Transport  this  bicycle  only  inside  other vehicles.  Secure  the  bicycle,  e.g. 
with the use of tension belts, to prevent slipping. Protect your bicycle, e.g. by covering it, against 
damage from sharp edges and other objects. No other items may be placed on the bicycle during 
its transport. The bicycle must not be clamped into the car transport system (roof racks, rear and 
interior carrying devices, etc.). 

 

The frame strength has been tested for the rider of up to 80 kg, however using the bicycle by the 
rider  with  heavier  weight  should  not  cause  any  problems,  if  he/she  is  using  the  bicycle  in 
accordance  with  this  manual  recommendations.  It  is  recommended  that  persons  with  heavier 
weight  should check the  frame strength before  they start  to use  the bicycle  according to their 
own physical conditions.   

5.

 

Where can you ride a bicycle 

If you overload your bicycle riding on the streets, roads and paths for which your bicycle is not suited, it 
is possible that parts of your bicycle may break or fail. This may lead to dangerous situations during the 
ride, falls and accidents. The Polka Bikes bicycles may be used only on the asphalt-covered roads, roads 
for bicycles, roads for bicycles and pedestrians and other paved surfaces. 

Polka Bikes Sp. z o.o. does not recommend performing jumps on the Polka Bikes bicycles and does not 
guarantee the proper functioning of the bicycles during such performance and in the future. 

 

Your safety on the roads, streets and terrain depends on your speed. The higher your speed, the greater 
your risk! 

Remember that all roads and streets may be damaged or have obstacles that can threaten your safety or 
damage your bicycle. In such terrain ride particularly slowly and carefully. If necessary carry or push your 
bicycle over such obstacles. Use your bicycle exclusively as a means of travel. 

There is a danger of falling if you ride the bicycle in a sporty manner and at a high speed. Adapt the use 
of your bicycle to your riding skills. 

 

Содержание Polka City

















Отзывы: