Polk Mono UM1A, Инструкция по установке и эксплуатации

Страница: 15 / 24

UM1A
14
PS
Press the PS soft button to scan stations stored in the preset list. The unit will pause for ten
seconds at each preset channel. Press the Encoder Knob button or the PS soft button
again to stop scanning when the desired channel is reached.
LIST
Press the LIST soft button to display the preset list. There are 18 preset locations to store
and allow convenient access to your favorite channels.
Store a Station
While tuned to the desired broadcast channel, rotate the Encoder Knob to navigate the
preset list and highlight the desired preset memory location. Press and hold the Encoder
Knob for 3 seconds or press the SAVE soft button to store the channel. The channel
information will appear in the display adjacent to the preset memory location number.
Recall a Station
Rotate the Encoder Knob button to navigate the preset list and highlight the desired preset
memory location. Press the Encoder Knob button to select and tune to the corresponding
stored channel.
CAT
Category mode options are CAT+, CAT- and INFO
Category Tuning
1. Press the CAT - /+ soft buttons to change the category. Each category title will be
displayed along with the channel list within the selected category.
2. Rotate the Encoder Knob to navigate the channel list within the selected category.
3. Press the SEEK/TUNE/TRK buttons to select a channel within the chosen category.
4. Press Encoder Knob button to confirm the channel selection.
Channel Direct Access Tuning
1. Press and hold the Encoder Knob button to access Direct Tune mode. “Enter
Channel Number: 0 _ _” will appear o n the display.
2. Rotate the Encoder Knob to select a digit (0 – 9) for each number position.
3. Press the Encoder Knob button to confirm each digit and move to the next digit.
4. Upon entering the last digit, the unit will tune to the desired channel number.
SiriusXM Channel Lock Feature
The Parental Control feature allows you to limit access to any SiriusXM channels, including
those with mature content. When enabled, the Parental Control feature requires you to enter
a passcode to tune to the locked channels. Information about setting the user passcode,
locking channels and the method to access locked channels is described below.
Setting the User Passcode
1. Press and hold the MENU button for more than 3 seconds to enter the system menu.
2. Rotate the Encoder Knob to navigate the menu list to the "SXM SETUP MENU"
option.
3. Press the Encoder Knob button to view "Set Lock Code".
4. Press the Encoder Knob button to select Set Lock Code. “Enter Lock Code: 0 _ _ _”
prompt message will appear.
5. Rotate the Encoder Knob to select a digit (0 – 9) for each number position. The
default code is "0000". Press the Encoder Knob button to confirm each digit and
move to the next digit.
6. Upon entering the last digit, the unit will prompt for confirmation of the code.
7. Repeat the same steps to enter the code again.
Locking a Channel
1. Press and hold the MENU button for more than 3 seconds to enter the system menu.
2. Rotate the Encoder Knob to navigate the menu list to the "SXM SETUP MENU"
option.
3. Rotate the Encoder Knob to "Locked Channels…".
4. Press the Encoder Knob button to select. “Enter Lock Code: 0 _ _ _” prompt message
will appear.
5. Enter the Lock Code, a list of channels with open lock icons will appear.
6. Rotate the Encoder Knob to select a channel you wish to lock
7. Press the Encoder Knob button to lock the channel. The locked icon will indicate the
channel has been successfully locked.
Accessing a Locked Channel
1. Tune to the desired channel using the |<< or >>| soft buttons or use the direct access
tuning method.
2. An “Enter Lock Code: 0 _ _ _” prompt message will appear.
3. Enter the Lock Code within 10 seconds to unlock and tune the channel.
4. The device will remain in “unrestricted” (unlocked) mode until the next power cycle.
Reset SiriusXM Channel Lock Code
If you forget your Parental Control lock code, use the following directions to reset the code to
the default “0000”. Resetting the lock code will not affect the locked channels list.
1. In SiriusXM mode, tune to Channel 0.
2. Rotate the Encoder Knob to change the volume setting to 0.
3. Press the Power Button to turn off the unit.