10
SADRIN WS SMA
POLITEC | INSTALLATION MANUAL - VER.2.1
•
On the lower cover of the column, make a small incision to ensure the drainage of rainwater that
could accumulate inside the closure.
•
Fix the whole structure to the wall; in the
WSI
version, it is possible to make small adjustments both
horizontally and vertically thanks to the special holes positioned on the caps.
•
In the
WSE
version, it is possible to make small adjustments only horizontally, after fixing the box on
the upper part of the columns.
Adjustment
holes
WSE
WSI
•
At the end of the installation and alignment process, close the cover with the supplied screw.
N.B.:The barriers in the WSE version must be mounted with the terminal board at the top, where the
box is located, to allow the connection of the cable from the terminal board to the radio transmitter.
However, it is possible to move the box from the column, for example it can be put inside the shutter
box and arrange the height of the columns in full view for aesthetic reasons, taking care to extend all
the connections inside and close the columns with the top cap.