9
NAT WS
POLITEC | INSTALLATION MANUAL - VER.2.0
In any case, it is necessary to take into consideration the specific beam diffusion of each model, to
avoid reflection of the beams caused by the ground or by adjacent objects.
WARNING:
Product warranty is invalid if there is any hole in the sensor or any component
7.Mounting
1.
Remove the metal plate from the
back of the transmitter holder
2.
Fasten the metal plate to the wall:
3.
Position the battery holder by
inserting the upper hook and tighten
the screw located at the bottom as
shown in the figure
4.
Check that the seals in the canopy are
inserted correctly
7.1 Direct wall mounting