POLITEC s.r.l. | Manuale MANA IR SMA – Ver. 2.5
20
7.
OPTICS CONFIGURATION
7.1.
OPTICAL TX
1 2 3 4 5 6 7 1 2 3 4 5 6
TX1
ON
TX2
ON
TX3
ON
TX4
ON
Through DIP 7 in ON (as default) and lighted LED POWER is occur the correct operation of TX optics.
The power of the heaters is set by default to 24V; you can use 12V by changing the configuration of the jumper
(SW4).
The voltage can be both AC and DC.
Note: The settings and relative addresses are already set by Default.
TAMPER
POWER ON LED
HEATERS SUPPLY
24V
12V
TX1: Not in use in
the case of column
with 3TX
TX1 and TX2: Not
in use in the case of
column with 2TX
