2.
To avoid the possibility of injury, handle the sprayer carefully; carry it only by holding on to the
built-in handrail taking care not to drop it.
3.
Make sure to wear protective equipment (protective goggles, gloves, protective suit and
protective footwear).
4.
Do not apply agents if it is very cold, very hot or if a strong wind is blowing.
5.
Do not consume food and drinks or smoke while using the sprayer.
6.
Prior to any action of inspection, adjustment or maintenance of the sprayer, make sure you’ve
taken all measures as listed in the chapter USING THE SPRAYER under points 10 and 11. If you
haven’t, carry them out, then proceed to the planned action.
7.
After any contact with the sprayer, wash your face, face and hands and be sure to change your
clothes.
7.
ENVIRONMENTAL PROTECTION MEASURES
1.
Make sure to follow the manufacturer's instructions for product concentration, quantity and
time of application, storage and procedure with the remaining product.
2.
Prepare only the amount of product you intend to use, place the sprayer upright on a stable
surface and fill carefully. Then close the container tightly.
3.
Limit the application of product only to the areas for which it is intended and do not allow
product to disperse to or near watercourses, public areas, places of residence.
4.
When applying agents, move away others persons, animals and technical product from the
place you are treating.
5.
Dispose of the liquid leftover from use, maintenance, rinsing and washing of the sprayer in
accordance with the manufacturer's instructions.
6.
Dispose of the remaining packaging of the product in accordance with the manufacturer's
instructions.
7.
Do not store or transport the sprayer filled with prepared agent and which has not been
handled in accordance with the instructions listed in the chapter USING THE SPRAYER under
points 10 and 11.
8.
Do not dispose of an expired sprayer and parts remaining after the replacement of worn out
parts in the environment or in municipal waste, but rather hand them over to a professional
waste manager.
8.
MAINTENANCE
1.
If you notice a malfunction while operating the sprayer, stop working with it and rectify
the fault. Be sure to observe all protective measures listed in the SAFETY MEASURES
WHEN WORKING WITH THE SPRAYER and ENVIRONMENTAL PROTECTION MEASURES
sections.
2.
After you finish operating the sprayer, always follows the instructions listed in the
section USING THE SPRAYER under points 10 and 11.
