10.
Once you have finished working with the sprayer, turn the sprayer upside down and let the air
out of the sprayer. You can now open and empty the sprayer.
11.
Fill the sprayer with 0.5 lit. of clean water, close it, shake it, establish working pressure in it and
spray for 30 sec. to wash the channels. Repeat the procedure from point 11. Wash the outside
of the sprayer.
Page 2
5. SAFETY INSTRUCTIONS
1.
Do not use the sprayer for purposes other than plant care.
2.
Do not pour liquid into the container over the last quantity mark.
3.
Use only water-soluble plant care products.
4.
Do not use: acids, alkalis, oils, paints, adhesives, liquids, fuels, thinners and the like.
5.
Do not use the sprayer if the temperature of the liquid or the environment is lower than 5 OC
(close to freezing point) or higher than 35OC (warmer than hands).
6.
When establishing working pressure (pumping), check whether you have reached the pressure
that gives the jet appearance of fog by briefly opening the switch. When you achieve such a jet
shape, stop pumping.
7.
Do not establish pressure in the sprayer in any other way besides pumping using the built - in
pump by hand (such as : pumps that are not the original part of the sprayer, compressors, water
supply networks, pressure washers, pressure washers from another pressure vessel and the
like).
8.
Do not transport or store a pre-filled sprayer or sprayer under pressure.
9.
Do not repair the sprayer with parts that are not on the original list spare parts or using parts
from other manufacturers
10.
Do not make any modifications to the sprayer.
11.
Do not store the sprayer in areas where the freezing of the liquid in the spray channels or in the
spray tank can occur.
12.
In the event that liquid remains in the sprayer and freezes, this sprayer should no longer be
used.
13.
Never open a sprayer under pressure, follow the instructions under point 10 in the chapter
USING THE SPRAYER
6. PROTECTIVE MEASURES WHEN WORKING WITH THE SPRAYER
Agents used for plant care are usually harmful to health; therefore, it is necessary to adhere to the
following measures when using the sprayer:
1.
Be sure to read and follow the manufacturer's recommendations listed on the packaging or in
the instructions for the product that you are using.
