Polimaster BDG1-PM1403, Руководство по эксплуатации

Страница: 14 / 38

14
6 Proper use of BDG1
6.1 Switch BDG1 On/Off
6.1.1 BDG1 detection unit is connected to BDOI by cable # 2 or to PC by RS-485 or USB
interface
6.1.2 Connect BDG1 to BDOI.
Connect BDG1 to BDOI using the cable # 2. Switch BDOI on.
To switch BDOI on:
press the ON/OFF key on the BDOI case (Figure 6.1, position 11).
When BDOI is switched on, the power is automatically applied to BDG1. At that the POWER
LED will light on the front panel of BDG1 (Figure 4.1, position 1).
1 – emits sound (audio) alarm when set DER, DE thresholds are exceeded;
2 – "ALARM" LED – for alarming;
3 – "BAT" LED – for On/Off state indication or BDOI charging;
4 – GPS receiver;
5 – color LCD 3,5” (89 mm);
6 – keypad keys;
7 – Wi-Fi antenna;
8 – fastening for removable clip, bracket;
9 – GPRS antenna, GSM;
10 – RESET key - restart BDOI operation system;
11 – ON/OFF key – switch BDOI On/Off;
12 – battery compartment;
13 – connector for external detection units (RS485 interface);
14 – connector for PC connection and accumulators charge (USB interface);
15  fastening for removable clip, bracket.
Figure 6.1 – External view of BDOI