Polestar 2 2020, Руководство пользователя

Страница: 155 / 568

Raise the stalk switch further for the wip-
ers to sweep at high speed.
Related information
• Using the rain sensor (p. 155)
• Using windscreen and headlamp washers
(p. 157)
• Wiper blades and washer fluid (p. 154)
• Using the rain sensor's memory function
(p. 156)
• Filling washer fluid (p. 538)
• Setting the wiper blades to service position
(p. 537)
• Replacing windscreen wiper blades (p. 536)
IMPORTANT
• Before activating the wipers - ensure
that the wiper blades are not frozen in,
and that any snow or ice on the wind-
screen is scraped away.
• Use plenty of washer fluid when the
wipers are cleaning the windscreen.
The windscreen must be wet when the
windscreen wipers are operating.
Using the rain sensor
The rain sensor automatically starts the wind-
screen wipers based on how much water it
detects on the windscreen. Rain sensor sensi-
tivity can be adjusted with the thumbwheel on
the right-hand stalk switch.
Right-hand stalk switch.
Rain sensor button
Thumbwheel sensitivity/frequency
When the rain sensor is activated, the rain sen-
sor symbol
is shown in the driver display.
Activating the rain sensor
When activating the rain sensor, the windscreen
wipers must be in position 0 or in the position for
a single sweep.
Activate the rain sensor by pressing the rain
sensor button
.
Move the lever down to make the wipers move.
Turn the thumbwheel upward for higher sensi-
tivity and downward for lower sensitivity. An
extra sweep is made when the thumbwheel is
turned upward.
>>
Windows, glass and mirrors 155