8
INSTALLATION (continued)
Connecting A/V Equipment
(continued)
The following are diagrams showing basic instructions for attaching external equipment, like a VCR or DVD player, to your
TV set. Please refer to operation manuals of external audio/video equipment that will be connected to your set for additional
instructions. PLEASE TURN OFF ALL POWER BEFORE CONNECTING DEVICES TOGETHER.
The side terminals may be easier to use with a camcorder. The connections are identical.
Connect VCR's RF OUT terminal to the RF IN jack located on the rear panel of the TV.
Coaxial Cable
DO NOT use the DVD IN terminals and AV IN(3) terminals at the same time.
DO NOT connect both AV IN(1) and S-Video terminal. Use only one of the two. With DVD signal
input, there is no DVD video output. Also, remember to connect the audio cables when using
S-Video and DVD terminals.
DVD Player
Camcorder
VCR
VCR
AUDIO/VIDEO OUT
AUDIO/VIDEO IN
Input from Device to TV
Output from TV to Device
With S - VIDEO Terminal
YCbCr
VIDEO
AUDIO
VIDEO
AUDIO
Camcorder
AUDIO/VIDEO OUT
AUDIO/VIDEO IN
Input from Device to TV
With S - VIDEO Terminal
YCbCr
VIDEO
AUDIO
VIDEO
AUDIO
RF IN
VCR