15
Preparation of Remote Control
Follow the steps below to install the battery.
1.
Pull the battery holder out from the remote control in the direction of the arrow.
2.
Load a new battery properly with the (+) sided up.
3.
Insert the battery holder back into the remote control.
Battery type: CR2025 3V
Battery service life: approximately 1 year under normal use (at room temperature).
Use of Remote Control
Point the remote control unit to the remote sensor within the range of 5 meters and
angles of 60 degree, and without obstacles between remote control and remote sensor.
Remote Control
Note
¾
Improper use of the battery may cause
overheating, explosion or ignition, which
can result in an injury or a fire. Battery
leakage may damage the remote control.
¾
Do not expose the remote control unit to
direct sunlight.
¾
Do not recharge, disassemble, deform or
heat the battery.
¾
Do not put the battery in fire or water.
¾
Immediately replace the exhausted
battery.
¾
Take out battery when the remote is not in
use for a long time.
