7
NOTE
: While charging the battery, the LED light turns on. The battery is fully charged
when the LED light turns off.
Battery Power:
Some features (such as Flash), will not work if the battery power level is low.
When the battery power is low the battery icon turns red and the camera will
automatically turn off a few seconds later.
The energy status of the power is displayed on LCD as shown below:
Full battery power
Medium battery power
Low battery power
Make sure an SD card has been properly inserted into your camera.
SD Memory cards are not included.
To properly insert the SD Memory Card:
Push the SD card into the slot in the direction shown on the camera (see SD icon by the
SD card slot).
Push the SD card until you hear a slight clicking sound. This indicates the SD card has
been inserted correctly.
NOTE
:
After the camera is powered on, a Memory Card icon appears on the LCD display. If you
do not see the SD icon on the display, please check if the card was inserted properly.
Press the
POWER button to turn on the camera.
