background image

- 23 - 

 
 
 

 

Symptom What 

To 

Check 

LCD has does not display a 
picture. 

     

Make sure the power has been switched on and the 

unit is connected correctly to the power adapter. 
Check the signal input.    

There is no image, or there 

is a mosaic or unstable 
image .     

•    Check the external audio and video signal input has 

been connected, and the input is correct, and 
receiving a signal within range.    

 

Speakers have no sound.   

•  Check whether the volume is adjusted to the 

minimum level, whether the headphone jack has 
been connected to the headphone, whether the 
receiver of the unit is in the pause status.       

The remote control does not 
work. 

•    Make sure there aren’t any obstructions between the 

remote control and the receiver of the unit.   

•    Make sure you are pointing the remote control at the 

remote control sensor of the receiver of the unit. 

•  Make sure batteries are inserted correctly (check 

polarity). 

•  Replace weak batteries.   

The receiver of the unit does 
not work in wireless mode.   

K •  Make sure that  the signal has been connected 

correctly. . 

•      Make sure that the power switch of signal has been 

pushed to on.   

•      Make sure that the distance between signal and the 

receiver is within 20 meters.   

The connection time in the 
wireless status is beyond 
one minute.   

•    Turn the power of thereceiver off.   
•    Make sure the signal is connected correctly.   
•    Push the power switch of the receiver to on.   

Signal inference occurs 

Anyone of the following products may interference with 
LF-61001 wireless transmission. Since there are more 
products in the market that are using a wireless 
technique. Check whether the instances below exist: 
•  Other wireless equipment, such as wireless Home 

Router(2.4 GHz, 5GHz). 

   

•    Cordless Phone(2.4 GHz, 5.8GHz).

 

•    Micro wave Ovens (2.4 GHz). 
•  

Industrial or Medical Equipment (2.4 GHz, 5GHz 

bands).  

 

  Signal reduction occurs 

When the signal of the receiver is located below the a 
floow or large object, these may cause a weaker 
wireless signal.  Check whether the instances below 
exit: 
•  

Large home appliance such as washer, dryer, 

refrigerators etc.   

•    Wall/Door/Floor constructed with metal etc.   

Troubleshooting 

Содержание FLM-1000WL


























Отзывы: