Polaroid E2280GW, Руководство пользователя

Страница: 37 / 60

36
3.2.8 Parking Mode
To monitor the vehicle when it is parked, you can activate Motion
Detection or Vibration Detection.
Follow the steps below to change the settings for Parking Mode:
1. Touch to enter main menu.
2. Touch to switch over to Driving Safety Main Menu.
3. Touch / to select for
entering Parking Mode menu.
4. Touch
/
to configure
Parking Mode (Off / Motion
Detection / Vibration Detection).
•
Off: No parking monitoring
activated.
•
Motion Detection: If
disconnected from power when
the device is powered on, the
system alert message “Wait for
10 seconds to enter Motion
Detection, or touch screen to power off.” will be
displayed on the screen. This means the system will enter
Motion Detection automatically in 10 seconds, when the
device detects any motion in front of lens, Video Record will
be activated for a duration the same as the length setting. If
the screen is touched anywhere in 10 seconds, the device
will be powered off instead of entering Motion Detection
mode.
•
Vibration Detection: If disconnected from power when the
device is powered on, the system alert message “Wait for
10 seconds to enter Vibration Detection or touch screen
to power off.” This means the system will enter Vibration
Detection automatically in 10 seconds; when the device
detects any external vibration (sensitivity approximately 48
mg) applied to the vehicle after three minutes when all
passengers have alighted, Video Record will be activated