38
Using Your LCD TV
How to Use PC and SCART Connectivity Menu
1
With the power turned on, press
PC/HD
button to select VGA mode.
2
Press the MENU button on the remote control to display the on-screen Main Menu. Use the
◄►
buttons to
select
Connectivity
and press
▼
.
3
Press the
▼
button to highlight
PC
. Press
OK
to enter the sub-menu.
4
Use the
▲▼
buttons to highlight your desired option and press
OK
.
5
Use the
◄►
buttons to make adjustments and press OK.
6
Press MENU to return to the previous menu, or press EXIT to exit the menu.
Connectivity:
Main Menu (In any mode, except for VGA mode)
PC: The option of PC in the main menu of Connectivity only appears in
VGA mode.
Sub-Menu Options:
Auto Image
Automatically adjust picture
H Position
Adjust the horizontal position of the picture
V Position
Adjust the vertical position of the picture
Phase
Adjust the picture phase
Clock
Adjust the width of the picture
Return
Return to the main menu
Scart1 Output:
Output SCART1 signal - TV / Composite / S-VIDEO / DTV
Scart2 Output:
Output SCART2 signal - TV / Composite / S-VIDEO / DTV
Your current PC resolution and frequency appears, when PC is connected. To adjust the PC resolution, follow these steps:
1
Connect your PC and turn the power on.
2
Use
▲▼
buttons to highlight your desired option and press
OK
on the remote control.
Notes:
• “Wide mode selection” will appear in some specific PC resolutions of 1024x768, 1280x768, 1360x768, 640x350 & 720x400.
• Auto mode is strongly recommended.
