ENGLISH
9
Chapter 1 Introducing the LCD TV
How to Setup the TV
Follow the instructions below to set up and install the LCD TV:
Use a supplied antenna cable to connect the VHF/UHF signal to the LCD TV’s
ANT. terminal (refer to page14).
Connect the AC power cord to the back of the TV and then to the wall outlet.
Insert the 2 supplied batteries in remote control.
Step1
Slide the back cover up to open the
battery compartment of the remote
control.
Do not use caustic cleaners (porcelain, stainless steel, toilet, or oven cleaner
etc.) on the remote, as it may suffer damage.
Step2
Insert two AAA size batteries.
Make sure to match the (+) and
( - ) ends of the batteries with
the (+) and ( - ) ends indicated
in the battery compartment.
Slide the cover back into place.
Connect
an
external A/V device (refer to page16-23).
