The product has no power switch and is always on as long as
it is connected to the power supply.
Care and cleaning
• Disconnect the transformer from the power supply before
cleaning and allow the LEDs to cool down sufficiently.
• To clean, use a clean, dry, lint-free cloth. For stubborn dirt,
slightly dampen the cloth with water.
• Allow the product to dry completely before continued use.
Disposal
Electronic devices are recyclable waste and must not
be disposed of in the household waste. At the end of its
service life, dispose of the product according to the
relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the
protection of the environment.
Product overview
Operation
Do not set up or operate the product under water.
Make sure that the cables hang loosely and are not
stretched too tightly. Failure to heed this warning may
cause the cables to tear.
Do not connect the product to the power supply while
it is still in the packaging. Lay the product out entirely
before connecting it to the power supply.
Do not hang any objects from the product and do not
cover the product.
The LEDs are non-dimmable and non-replaceable.
1. Carefully spread the product so that it is not bundled
together.
2. Hang the product on the desired surface (e.g. top of a
Christmas tree) using the loop.
3. Separate the individual strands as desired.
4. Connect the plug to the correct connector on the
transformer.
5. Secure the connection by turning the plug‘s screw cap onto
the transformer‘s thread.
6. Connect the transformer to a power outlet.
7. The LEDs will turn on when the chain is connected to the
mains.
8. Disconnect the transformer from the power outlet for
extended periods of disuse.
2 m
5 m
2 m
5 m
Technical data
a) Decorative fairy lights
Item No.
1558362
1558363
Protection type
IP44
Operating voltage
6 V/DC
Power consumption
max. 2.4 W
Number of lights
200
Luminous colour
Cool White
Warm White
Power cable length
5 m
Distance between
lights
10 cm
Operating conditions
-20 to +40 °C
Storage conditions
-20 to +40 °C
Weight
170 g
b) Transformer GP-SW060DC1000-IP44(EU)
Protection type
IP44
Input voltage
100 - 240 V/AC, 50/60 Hz
Output voltage
6 V/DC
Output current
1000 mA
Output power
max. 6 W
These operating instructions are published by CEI Conrad Electronic International (HK) Limited, 18th Floor, Tower 2,
Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong. All rights including translation reserved.
Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems
require the prior written approval by the editor. Reprinting, also in part, is prohibited. These operating instructions
represent the technical status at the time of printing.
© Copyright 2017 by CEI Conrad Electronic International (HK) Limited
1558362_3_V2_0817_02_LS_m_EN
distributed by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau