Outdoors
Operating instructions
Intended use
Use this product to decorate interior and exterior spaces (IP44).
For safety and approval purposes , you must not rebuild and/or
modify this product. If you use the product for purposes other
than those described above, the product may be damaged. In
addition, improper use can cause hazards such as short-circuiting,
fire, electric shock etc. Read the instructions carefully and keep
them for future reference. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European
requirements. All company names and product names are
trademarks of their respective owners. All rights reserved.
Delivery content
Safety instructions
Read the operating instructions carefully and especially
observe the safety information. If you do not follow the
safety instructions and information on proper handling
in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will
invalidate the warranty/guarantee.
a) Persons / Product
• The device is not a toy. Keep it out of the reach of children and
pets.
• Do not leave packaging material lying around carelessly. These
may become dangerous playing material for children.
• The product must not be connected electrically with other light
chains or decorations.
• Decorative fairy lights
• Transformer
• Operating instructions
• Always check the product for damages before use. Should you
discover any damage, cease use of the product. If you discover
damages while the product is in use (i.e. damaged transformer),
do not touch the product, risk of fatal injury due to electric
shock! First remove the power outlet to which the product
is connected from the power supply (flip off the fuse and/or
automatic circuit breaker and then turn off the residual current
operated circuit breaker to disconnect the power outlet at all
phases). Now unplug the transformer from the power outlet.
Discontinue use of the product immediately, dispose of it in an
environmentally friendly fashion.
• Protect the product from extreme temperatures, strong jolts,
flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it
out of operation and protect it from any accidental use. Safe
operation can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient
conditions or
– has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even
from a low height can damage the product.
• The lights become hot during operation. Keep the product away
from highly combustible materials while operating.
• The mains outlet must be located near to the device and be
easily accessible.
• As power supply, only use the supplied transformer.
• Only connect the transformer to a normal mains socket
connected to the public supply. Before plugging in the
transformer, check whether the voltage stated on the
transformer complies with the voltage of your electricity
supplier.
• Never connect or disconnect transformers if your hands are
wet.
• Never unplug the transformer from the mains socket by pulling
on the cable; always use the grips on the plug.
• When setting up the product, make sure that the cable is not
pinched, kinked or damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become
entangled in them. This poses a risk of injury.
• For safety reasons, disconnect the transformer from the mains
socket during storms.
• This product is designed to be used indoors and outdoors.
• Attention, LED light:
– Do not look directly into the LED light!
– Do not look into the beam directly or with optical instruments!
• Never use the product immediately after it has been brought
from a cold room into a warm one. The condensation generated
could destroy the product. The plug-in power supply unit also
involves danger to life by electric shock! Allow the product to
reach room temperature before connecting it to the power
supply and putting it to use. This may take several hours.
• This product’s flexible power supply cord cannot be exchanged
or repaired. If the cord is damaged, the product must be
disposed of.
• Carefully separate the individual strands on the chain. Never pull
on the LEDs, as this may damage the lights.
b) Miscellaneous
• Consult an expert when in doubt about operation, safety or
connection of the device.
• Maintenance, modifications and repairs are to be performed
exclusively by an expert or at a qualified shop.
• If you have questions which remain unanswered by these
operating instructions, contact our technical support service or
other technical personnel.
Decorative fairy
lights
LED mini fairy lights,
cold white LEDs
Item no. 1558362
LED mini fairy lights,
warm white LEDs
Item no. 1558363