Installation
Select a place of installation that is free of moisture, water, dirt and strong
sunlight.
Do not install the LED strip while it is connected to the power supply.
Make sure, that the installed LED strip does not cause a tripping hazard.
Observe the following illustration for the installation.
•
Completely uncoil the strip
(1)
.
•
If you do not require the full length of the strip, then the strip can be cut off at the
positions marked with a pair of scissors. The piece cut off can no longer be used.
•
The LED strip can be installed on suitable surfaces e.g. on furniture or the like,
using the adhesive tape situated on the underside.
-
The LED strip must be installed, so that it is not subjected to any mechanical
loads.
-
It must not be installed in walkways, as it will be damaged if stepped on.
•
Before affixing the LED strip, carefully clean the surface intended for installation of
dust, dirt and grease, as otherwise the adhesive tape will detach from the surface.
•
Pull of the protective strip piece by piece and firmly affix the LED strip
(2, 3, 4)
.
-
Do not use any force when pressing firm.
-Important!
The adhesive tape can leave behind permanent traces on the
installation surface.
•
Connect the DC plug of the power adapter with the corresponding socket at the
end of the LED strip
(5)
.
•
Connect the power adapter to a proper mains socket of the public supply
network
(6)
.
Operation
Do not operate the product in the coiled state.
Do not cover the product during use.
The LEDs are neither dimmable nor replaceable.
•
The LEDs light up as soon as the power adapter is connected.
•
Disconnect the power adapter to switch off the LEDs.
Cleaning and care
•
Always disconnect the power adapter from the mains before cleaning the product.
•
Never use aggressive detergents, rubbing alcohol or other chemical solutions, as
these could damage the casing or cause the product to malfunction.
•
Use a dry, lint-free cloth to clean the product.
Disposal
Electronic devices are recyclable waste and must not be disposed of in
household waste. Always dispose of the product according to the relevant
statutory regulations.
You thus fulfill your statutory obligations and contribute to the protection of
the environment.
Technical data
a) LED strip
Operating voltage ................... 12 V/DC
Power consumption ................
6 W
Number of LEDs .....................
90
Colour temperature ................. 4000 K (neutral-white)
Operating conditions ............... 0 to +40 °C, 0 - 95 % RH
Storage conditions .................. -10 to +45 °C, 0 - 95 % RH
Dimensions (L x W x H) .......... 3000 x 8 x 2.5 mm
Weight .................................... 82 g
b) Power adapter
Input voltage ........................... 100 – 240 V/AC, 50/60 Hz
Output voltage/current ............ 12 V/DC, 0.6 A
These operating instructions are published by CEI Conrad Electronic International (HK) Limited, 18th Floor, Tower 2,
Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong. All rights including translation reserved.
Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems require
the prior written approval by the editor. Reprinting, also in part, is prohibited. The operating instructions reflect the current
technical specifications at time of print.
Copyright 2017 by CEI Conrad Electronic International (HK) Limited
*1547244_v2_0717_02_IPL_m_en
Distributed by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
