Polaris Victory Sport Cruiser 2001 Скачать руководство пользователя страница 71

Страница: 71 / 73

VICTORY MOTORCYCLE WARRANTY POLICY

LIMITED WARRANTY

Victory Motorcycle Division, Polaris Sales Inc., 1225 Highway 169 No., Minneapo-

lis, Minnesota 55441-5078, gives a ONE YEAR LIMITED WARRANTY on all com-

ponents of the Victory Motorcycle against defects in material or workmanship. This

warranty covers the parts and labor charges for repair or replacement of defective

parts which are covered by this warranty. This warranty begins on the date of pur-

chase. This warranty is transferrable to another consumer during the warranty pe-

riod through a Victory Motorcycle dealer.

REGISTRATION

At the time of sale, the Warranty Registration Form must be completed by your

dealer and submitted to Victory Motorcycle Division, Polaris Sales Inc. within ten

days. Upon receipt of this registration, Victory Motorcycle Division, Polaris Sales

Inc. will record the registration for warranty. No verification of registration will be

sent to the purchaser as the copy of the Warranty Registration Form will be the war-

ranty entitlement. If you have not signed the original registration and received the

“customer copy”, please contact your dealer immediately. NO WARRANTY COV-

ERAGE WILL BE ALLOWED UNLESS YOUR VICTORY MOTORCYCLE IS REG-

ISTERED WITH VICTORY MOTORCYCLES DIVISION OF POLARIS SALES

INC.
Initial dealer preparation and set-up of your Victory Motorcycle is very important in

ensuring trouble-free operation. Purchasing a machine in the crate or without

proper dealer set-up will void your warranty coverage.

WARRANTY COVERAGE AND EXCLUSIONS:
LIMITATIONS OF WARRANTIES AND REMEDIES

The warranty excludes any failures that are not caused by a defect in material or

workmanship. This warranty does not cover accidental damage, normal wear and

tear, abuse or improper handling. This warranty also does not cover any Victory

Motorcycle that has been altered structurally, modified, neglected, improperly

maintained, used for racing, or used for purposes other than for which it was

manufactured, or for any damages which occur during trailer transit or as a result

of unauthorized service or the use of unauthorized parts. In addition, this warranty

does not cover physical damage to paint or finish, stress cracks, tearing or punctur-

ing of upholstery material, corrosion, or defects in parts, components or Victory Mo-

torcycle due to fire, explosions or any other cause beyond Victory Motorcycle Divi-

sion, Polaris Sales Inc. control.
This warranty does not cover the use of unauthorized lubricants, chemicals, or

fuels that are not compatible with the Victory Motorcycle.

ProCarManuals.com

Содержание Victory Sport Cruiser 2001










































































Результаты поиска

Содержание Victory Sport Cruiser 2001

Отзывы:

Похожие инструкции для Victory Sport Cruiser 2001

Бренды по названию

Популярные бренды

Polaris Victory Sport Cruiser 2001, Руководство пользователя

Результаты поиска

Содержание Victory Sport Cruiser 2001

Отзывы:

Похожие инструкции для Victory Sport Cruiser 2001

Бренды по названию

Популярные бренды