Polaris Victory Deluxe Cruiser 2001 Скачать руководство пользователя страница 80

Страница: 80 / 107

MULTI-FUNCTION DISPLAY

MFD Functions (cont.)

CLOCK

- You must be in CLOCK mode to set the time. To set the

time, hold SET key for 3 seconds (hours digits start flashing), press

SET to select the hour and MODE to enter the set hour; the first

digit of minutes will begin to flash. press SET to select the number

and MODE to enter it; continue with this procedure for the final dig-

it. After the last digit is entered, the display will return to normal op-

erational mode (colon flashing). After the clock is set, pressing the

MODE button will change to the next LCD function.

BACKLIGHT DIMMING

- the intensity of the backlight of the mod-

ule can be changed to one of 6 levels by pressing the SET button.

The LCD display will show in bars the proportional part of the dim-

ming. In this mode, the DIM indicator is on and pressing the MODE

button once will change to the next LCD function.

HIGH BEAM INDICATOR DIMMING

- The intensity of the high

beam indicator can be set to one of 4 levels by pressing the SET

button. The LCD display will show HB followed by bars, indicating

the proportional part of the dimming. In this mode, the DIM indica-

tor is still on and pressing the MODE button once will change to the

next LCD function.

FUEL

- Fuel of the vehicle will be shown on the LCD display in gal-

lons or liters according to the current numeric system of the mod-

ule. The range goes from LOW (0.6 gals.) to FULL (4-5 gals.).

When low, the fuel icon flashes. In this function all indicators will

be off. Pressing the MODE button once will change to the next

LCD function.

VOLTMETER

- The voltage of the battery will be shown on the LCD

display. (i.e. Alt 12.3). In this function, all indicators will be off,

Pressing the MODE button once will change back to the first LCD

function.

CHECK ENGINE

- In this function, the microcontroller is checking

the Check Engine input line; the LCD will show Check Engine ev-

ery time this line turns low. This screen will be on for a period of

two seconds every 5 seconds as long as the Ch Engine line re-

mains low.

ProCarManuals.com

Содержание Victory Deluxe Cruiser 2001












































































































Результаты поиска

Содержание Victory Deluxe Cruiser 2001

Отзывы:

Похожие инструкции для Victory Deluxe Cruiser 2001

Бренды по названию

Популярные бренды

Polaris Victory Deluxe Cruiser 2001, Руководство пользователя

Результаты поиска

Содержание Victory Deluxe Cruiser 2001

Отзывы:

Похожие инструкции для Victory Deluxe Cruiser 2001

Бренды по названию

Популярные бренды