Polaris trail boss 325 Скачать руководство пользователя страница 184

Страница: 184 / 189

173

WARRANTY

LIMITED WARRANTY

Polaris Industries Inc., 2100 Highway 55, Medina, MN 55340,

gives a SIX MONTH LIMITED WARRANTY on all components of

the Polaris All Terrain Vehicle (ATV) against defects in material or

workmanship. Polaris also gives a one year limited warranty on

the final drive chain for failure due to defects. This warranty covers

the parts and labor charges for repair or replacement of defective

parts which are covered by this warranty. This warranty begins on

the date of purchase. This warranty is transferrable to another

consumer during the warranty period through a Polaris dealer.

There is a charge of $35.00 payable to Polaris Industries Inc.

REGISTRATION

At the time of sale, the Warranty Registration Form must be com-

pleted by your dealer and submitted to Polaris within ten days.

Upon receipt of this registration, Polaris will record the registration

for warranty. THE PURCHASER MUST COMPLETE AN ATV

SAFETY TRAINING COURSE PROVIDED BY THE DEALER IN

ORDER TO HAVE VALID WARRANTY ON THE ATV. No verifica-

tion of registration will be sent to the purchaser as the copy of the

Warranty Registration Form will be the warranty entitlement. If you

have not signed the original registration and received the “custom-

er copy”, please contact your dealer immediately. NO WARRAN-

TY COVERAGE WILL BE ALLOWED UNLESS YOUR ATV IS

REGISTERED WITH POLARIS.

Initial dealer preparation and set--up of your ATV is very important

in ensuring trouble--free operation. Purchasing a machine in the

crate or without proper dealer set--up will void your warranty cover-

age.

Содержание trail boss 325






























































































































































































Результаты поиска

Содержание trail boss 325

Отзывы:

Похожие инструкции для trail boss 325

Бренды по названию

Популярные бренды

Polaris trail boss 325, Руководство пользователя

Результаты поиска

Содержание trail boss 325

Отзывы:

Похожие инструкции для trail boss 325

Бренды по названию

Популярные бренды