77
MAINTENANCE
Carburetor
Your Polaris ATV is calibrated at the factory for optimal performance at
altitudes ranging from zero to 6,000 feet (1800 m) and temperatures of
+40 degrees F. (4 degrees C.) or higher. Above 6000 feet (1800 m) the
engine air/fuel mixture becomes overly rich and the engine loses
approximately 3% of its power for each 1000-foot (304.8 m) increase in
elevation. Although this power cannot be regained, adjustments to the
carburetor and drive system can be made to allow more efficient opera-
tion. Optional jets, available from your Polaris dealer, are required for
operation above 6,000 feet and temperatures below +40 degrees F. (4
degrees C.)
Tip:
Continuous operation of the engine without proper jetting when required
can cause poor performance, overheating or PVT or engine damage. See
your Polaris dealer for more information about jetting the ATV for conditions
in your area.
Carburetor/Engine Idle RPM Adjustment
If the engine idle speed is not satisfac-
tory, and all other conditions are favor-
able, the carburetor can be adjusted.
1. Place the transmission in gear. Lock
the parking brake.
2. Start the engine and allow it to warm
up for approximately five minutes.
3. Turn the screw in (clockwise) to
raise RPM. Turn the screw out
(counterclockwise) to lower RPM.
Idle
Adjuster
Содержание Trail Blazer 9921773
Страница 1: ......
Страница 120: ...117 MAINTENANCE LOG DATE MILES KM OR HOURS TECHNICIAN SERVICE PERFORMED COMMENTS...