Polaris SUNNY THERM, Инструкция по эксплуатации

Страница: 12 / 34

10
Device Introduction
Preheating furnace is useful for all of the thermal operations on
dental molded gypsum including removable prosthesis (cobalt
chromium) and fixed prosthesis (porcelain), also in the other
laboratory and industrial uses (other than dentistry) are applied.
This electric furnace which is able to be planned and comput-
erized control is used in order to plan controllable thermal cy-
cles in thermal speed and adjustable temperature maintenance
time and to prevent any unscientific function.
In many cases, it can be seen that after the completion of the
work, plaster mold cracked or its precision has been missed.
This is due to the lack of accurate and programmable furnace
so that thermal shocks hit the mold. By using cylinder furnace,
the size and shape of the mold will not be changed either.
Advantages of the device:
1
Programmable system and controllable with computer
2
Controlling of temperature, time and speed of heating in 3 steps
3
High speed and precision
4
Setting the machine and the program will be performed in idle
time (programming the timer and performing the program
after 100 hours)
5
Equipped with a warning system and technical
violation detector
6
Equipped with an alarm system in different stages of
performance during programing
7
Having10 memories for planning and implementing thermal
cycles. The information of the system would not be missed
in case of a power failure and power outages.
8
Showing of working stages with digital display and thermal
curves
9
Potential for quick and easy service