Polaris Sprotsman 700 Скачать руководство пользователя страница 103

Страница: 103 / 148

101

MAINTENANCE AND LUBRICATION

Lubrication

Oil System

The oil dipstick and fill tube are located on the left side of the vehicle
To check the oil:
1. Set machine on a level

surface.

2. Start the engine and let

it idle for 20-30
seconds.

3. Stop the engine and lift

the lever lock (A) on
the dipstick. Remove
the dipstick and wipe it
clean.

4. Re-install the dipstick

completely, remove it
and read the oil level.

NOTE:

Make certain

the dipstick is inserted
all the way into the
filler tube to keep the
angle and depth of stick
consistent.

5. Remove dipstick and check to see that the oil level is between the

full and add marks. Add oil as indicated by the level on the
dipstick. Do not overfill.

6. When reinstalling the dipstick, make certain to seat the lever lock.

SAFE

ADD 8 OZ

Содержание Sprotsman 700





















































































































































Результаты поиска

Содержание Sprotsman 700

Отзывы:

Похожие инструкции для Sprotsman 700

Бренды по названию

Популярные бренды

Polaris Sprotsman 700, Инструкция по безопасности и техническому обслуживанию

Результаты поиска

Содержание Sprotsman 700

Отзывы:

Похожие инструкции для Sprotsman 700

Бренды по названию

Популярные бренды