Polaris Sportsman XP 1000 S 2022, Руководство пользователя

Страница: 55 / 184

NOTICE
When the gauge is displaying a fault code, the warning telltale (check engine
or EPS) will blink to indicate which controller set the fault code.
3. To exit the Options Menu the user can select Exit Menu function from
Options Menu, can hold Mode Button and exit out of Options Menu, or not
press any button for 10 seconds, which will exit out of the Options Menu.
DIAGNOSTIC DISPLAY CODE DEFINITIONS
Open Load: There is a break in the wires that lead to the item listed in the chart
(injector, fuel pump, etc.), or the item has failed.
Short-to-Ground: The wire is shorted to ground between the electronic control
unit and the item listed in the chart.
Shorted Load: The wires leading to the item listed in the chart are shorted
together, or the item has shorted internally.
Short-to-Battery: The wire leading from the item listed in the chart to the
electronic control unit is shorted to a wire at battery voltage.
DIAGNOSTIC CODES
COMPONENT CONDITION SPN FMI
Throttle Position
Sensor Voltage Too High
51 3
Voltage Too Low
51 4
Engine Temperature
Sensor Voltage Too High
110 3
Voltage Too Low
110 4
Temperature Too High
110 16
Engine Overheat
Shutdown
110 0
Intake Air
Temperature Sensor Voltage Too High
105 3
Voltage Too Low
105 4
Manifold Absolute
Pressure Sensor Voltage Too High
102 3
Voltage Too Low
102 4
Signal Out of Range
102 2
Crankshaft Position
Sensor Circuit Fault
636 8
Plausibility Fault
636 2
53
FEATURES AND CONTROLS