Polaris Sportsman 9920775 Скачать руководство пользователя страница 23

Страница: 23 / 144

SAFETY

Operator Safety

WARNING

POTENTIAL HAZARD
Carrying a passenger on an ATV.
WHAT CAN HAPPEN
Carrying a passenger greatly reduces

the operator's ability to balance and

control the ATV, which could cause an

accident and injury to the operator

and/or passenger.
A passenger riding on a rack or in the

cargo bed can fall from the vehicle,

which could result in serious injury.
HOW TO AVOID THE HAZARD
Never carry a passenger.

WARNING

POTENTIAL HAZARD
Operating an ATV on paved surfaces,

including sidewalks, paths, parking lots,

and driveways.
WHAT CAN HAPPEN
ATV tires are designed for off-road use.

Operating on paved surfaces may

adversely affect the handling of the ATV

and could result in loss of control,

accident, and/or injury.
HOW TO AVOID THE HAZARD
Avoid operating the ATV on pavement. If

it's unavoidable, travel slowly and avoid

sudden turns or stops.

Содержание Sportsman 9920775

















































































































































Результаты поиска

Содержание Sportsman 9920775

Отзывы:

Бренды по названию

Популярные бренды

Polaris Sportsman 9920775, Руководство пользователя

Результаты поиска

Содержание Sportsman 9920775

Отзывы:

Бренды по названию

Популярные бренды