Polaris Sportsman 9920775 Скачать руководство пользователя страница 121

Страница: 121 / 144

118

ADJUSTMENTS

Rear Axle Drive Chain

To adjust the rear axle drive chain, loosen the rearmost eccentric locking

bolts and rotate using the same method as outlined for the front chain

adjustment. Total slack for the rear chain should be adjusted to 3/8"-1/2"

(9-13 mm) at the tightest point in the chain.

Optional Suspension Springs

Although the suspension has the capability of providing the best ride

possible, the following accessory springs are available to better suit

individual riding preferences.

NOTE:

Optional springs may be a different color than standard springs.

Springs may be painted to a desired color using Polaris touch-up
paint, available through Polaris dealers.

Front Strut Spring

7041375-067

OPTION

64/113 lb./in.

7041450-067

STANDARD

101 lb./in.

None

3/8"-1/2" (9-13 mm)

SOFT

FIRM

Содержание Sportsman 9920775

















































































































































Результаты поиска

Содержание Sportsman 9920775

Отзывы:

Бренды по названию

Популярные бренды

Polaris Sportsman 9920775, Руководство пользователя

Результаты поиска

Содержание Sportsman 9920775

Отзывы:

Бренды по названию

Популярные бренды