Polaris Sportsman 700 HO 2004 Скачать руководство пользователя страница 86

Страница: 86 / 139

MAINTENANCE AND LUBRICATION

Front Gearcase Oil (400/500)

The front gearcase lubricant level should be checked every six months

or 1000 miles (1600 km), whichever comes first. Front gearcase oil

should be changed annually. Use Polaris Premium Synthetic Gearcase

Lube (or GL5 80-90 weight gear lube). See page 121 for the part

numbers of Polaris products.

Oil Check

1. Position the ATV on a level surface.
2. Remove the fill plug (1) and view the

lubricant level. Lubricant should be

kept level with the bottom of the fill

plug threads.

3. Add the recommended lubricant as

needed to bring the oil to the proper

level.

Oil Change

1. Position the vehicle on a level surface and remove the fill plug.
2. Place a drain pan beneath the gearcase, remove the gearcase drain

plug and drain the oil.

3. Clean and reinstall the drain plug. Torque to 14 ft. lbs. (19 Nm).
4. Add 4 ounces (120 ml) of the recommended gearcase oil.
5. Reinstall the fill plug and check for leaks.

Содержание Sportsman 700 HO 2004












































































































































Результаты поиска

Содержание Sportsman 700 HO 2004

Отзывы:

Polaris Sportsman 700 HO 2004, Руководство пользователя, Страница: 86 / 139

Результаты поиска

Содержание Sportsman 700 HO 2004

Отзывы: