Polaris Sportsman 700 HO 2004 Скачать руководство пользователя страница 85

Страница: 85 / 139

MAINTENANCE AND LUBRICATION

Transmission Oil (400/500)

The transmission oil level should be checked every six months or 1000

miles (1600 km), whichever comes first. Transmission oil should be

changed annually. We recommend the use of Polaris Premium

Synthetic Gearcase Lubricant. See page 121 for the part numbers of

Polaris products.

Oil Check

On the Sportsman 400 and 500, the transmission oil dipstick (1) is

located near the rear brake disc on the right side of the ATV.

1. Position the ATV on a level

surface. Remove the fill plug

dipstick and wipe it clean.

2. Reinstall the dipstick

completely, then

remove it and check the

level. Add the

recommended oil as needed

to bring the level into the

safe operating range (2).

Oil Change

1. Remove the fill plug/dipstick.
2. Remove the transmission

drain plug (3). It’s

located on the

bottom of the

gearcase.

3. Drain the oil into a

drain pan and

dispose of properly.

4. Clean and reinstall the drain plug.
5. Add 32 oz. (948 ml) of the recommended transmission oil to bring

the level to the full mark on the fill plug/dipstick. Maintain the oil

level in the safe range.

NOTE:

See page 121 for the part numbers

of Polaris products.

6. Reinstall the fill plug/dipstick and check for leaks.

Содержание Sportsman 700 HO 2004












































































































































Результаты поиска

Содержание Sportsman 700 HO 2004

Отзывы:

Polaris Sportsman 700 HO 2004, Руководство пользователя, Страница: 85 / 139

Результаты поиска

Содержание Sportsman 700 HO 2004

Отзывы: