background image

126

MAINTENANCE

Cleaning and Storage

Washing the Vehicle

If a high pressure water system is used for cleaning (not recommended), 
exercise extreme caution. The water may damage components and could 
remove paint and labels. Avoid directing the water stream at the 
following items: 
• Wheel bearings
• Radiator
• Transmission seals
• Brakes
• Cab and body panels
• Labels and decals
• Electrical components and wiring
• Air intake components

If warning and safety labels are damaged, contact your POLARIS dealer 
for free replacement.

Grease all zerk fittings immediately after washing. Allow the engine to 
run for a while to evaporate any water that may have entered the engine 
or exhaust system.

Polishing the Vehicle

POLARIS recommends the use of common household aerosol furniture 
polish for polishing the finish on your POLARIS vehicle. Follow the 
instructions on the container.

Polishing Tips

• Avoid the use of automotive products, some of which can scratch the 

finish of your vehicle.

• Always use clean cloths and pads for cleaning and polishing. Old or 

reused cloths and pads may contain dirt particles that will scratch the 
finish.

Содержание RZR XP 1000 EPS High Lifter Edition

























































































































































Отзывы: