Polaris PVCR 3000 Cyclonic PRO, Руководство по эксплуатации, Страница: 63 / 134

63
5.
Wall-along cleanup mode button
6.
Timer button
7.
Cleanup Schedule button
8.
Time setting confirmation button
9.
Power modes toggle button (main and turbo)
10.
"Forward" button to control the vacuum cleaner motion, and to set time
11.
"Backward" button to control the vacuum cleaner motion, and to set time
12.
"Left" button to control the vacuum cleaner motion, and to set time
13.
"Right" button to control the vacuum cleaner motion, and to set time
DELIVERY SET
1. Robotic vacuum cleaner assembly - 1 pc.
2. Dust bag (installed) - 1pc.
3. Accumulator (electric battery - installed) - 1 pc.
4. HEPA filter (1 active, and 1 redundant) - 2pcs.
5. Charging base - 1pc.
6. Charger (adapter) -1 pc.
7. Lateral brushes (not installed): L - 2 pcs.; R - 2 pcs.
8. Baby battery of AAA type for the remote control unit - 2 pc.
9. Cleaning brush - 1 pc.
10. Remote control unit - 1 pc.
11. Operation manual - 1 pc.
12. Warranty sheet - 1 pc.
13. Package (polyethylene wr box) - 1 pc.
UNPACKING THE DEVICE AND GETTING STARTED

Open the box, carefully take out the device, remove all the package materials.

Remove any advertising stickers from the device body.

Check the delivery set for completeness (see "Delivery Set" Section).

Take out all the accessories and the charger.

Check all the components for integrity.

Install the lateral brushes (if they are not installed). For this, position the vacuum cleaner so that the bottom panel faces
upward. Put each of the brushes on its axis (brush marked with L shall be installed on the L axis, the right brush marked
with R - on the R axis as per the Figure) slightly pushing downward until a click.

The first-ever use shall be preceded by charging the accumulator to the full. See "ACCUMULATOR CHARGING" Section.
OPERATION
Due to the domestic environment complexity, the vacuum cleaner can miss some tough-to-access areas. To achieve
the best result, it is recommended to use the vacuum cleaner on a daily basis.
Remove any obstacles, toys, and wires from the floor to be cleaned. (Fig. 6)
If a carpet to be cleaned is fringed, tuck the fringe under the carpet. Use the vacuum cleaner only on even floors
and on low-pile carpets.
Do not stay on the path or at the door aperture during the cleaning, otherwise the vacuum cleaner does not reach
such areas.
Install a barrier if the vacuum cleaner is operated on a half landing or within a restricted space among furniture.
1. Put the vacuum cleaner having the dust bag preliminarily cleaned on the floor so that its control panel faces upward.
2. To activate the robotic vacuum cleaner, hold down the sensor on the control panel. The device utters a single
beep. The current time indication illuminates on the display. The vacuum cleaner is under the mode of waiting on a
command. To deactivate the vacuum cleaner, hold down the sensor again. The vacuum cleaner gets turned off,
the display dims, the device utters a two-shot beep. (Fig. 7)
3. If the vacuum cleaner is on, touch once more the sensor. The vacuum cleaner starts vacuuming according to the
main automatic mode. Touch the sensor again to bring the vacuum cleaner back to the "standby mode". (Fig. 8)