Polaris PVCR 0926W, Руководство по эксплуатации, Страница: 20 / 117

20
Purpose of indicators and buttons of the remote control device (Fig. 2)
1. Timer (displays the time the device began to work if is set)
2. Current time
3. Operation cycle start/stop button
4,5,7 - Buttons of the movements direction and time changes on the clock and the timer
6. Button for changing the time on the clock and timer and the Maximum Mode
8. Current time setting
9. Timer time setting
10. Along the Walls cleaning
11. Home button, the device direction to the charging station
12. Local cleaning
COMPONENT PARTS
1. Robot vacuum cleaner assembly 1pc.
2. Dust container (installed) 1pc.
3. Water tank (container for wet cleaning) with a cloth for wet cleaning 1pc.
4. Battery (rechargeable battery - installed) 1pc.
5. Charger (base + adapter) 1pc.
6. Spare side brushes 2 pcs.
7. Spare HEPA filter 1 pc.
8. Cleaning brush 1pc.
9. Spare cloth for wet cleaning 1pc.
10. Remote control device 1 pc.
11. User Manual 1 pc.
12. Warranty Certificate 1 pc.
13. Packing (plastic bag + box) 1 pc.
UNPACKING THE DEVICE AND GETTING STARTED
•
Open the box, carefully remove the device, release it from all packaging materials.
•
Remove all advertising stickers from the housing of the device.
•
Check the supply package (see the Component Parts Section).
•
Remove all the accessories and the charger.
•
Make sure that all component parts are not damaged.
•
Install the side brushes. To do this, place the vacuum cleaner upside down, side brushes (2 pcs.) with the
hexagonal hole down. Remove the fixing screws of the side brushes from the brush shafts using a
Phillips screwdriver (not supplied). Put each brush on its axis (the brush with letter L on the left axis, the
brush with letter R on the right axis according to the image in Section 5 DESCRIPTION OF THE
DEVICE) and tighten the screws with a slight effort.
•
Charge the battery before the first use. See the Section CHARGING THE BATTERY.
OPERATION
1. Install the dust-collecting container 16 assembled with the filters 13, 14, 15 into the compartment
on the back of the device (see section 5 Description of the
Device”),
or the container for wet
cleaning 17 after filling it with clean water without adding detergents to the upper mark complete
with a cloth 19. The cloth must first be moistened with clean water without adding detergents and
squeezed slightly. (Fig. 3)
Attention: Clean the floor from dust before wet cleaning.