Instr 9927474
Rev 01 2017-02
Page 3 of 14
INSTALLATION INSTRUCTIONS
NOTE
This kit contains the same components as
Sportsman (non-XP) winch kit (PN 2882242), but
have been pre-assembled differently. If you need to
install this kit on a Sportsman (non-XP) vehicle, refer
to image below that shows the contactor location
and wire routing for Sportsman (non-XP) winch kit,
and reassemble the contactor and wiring to match
below image. You will need to download instructions
manual (PN 9927475) and follow those instructions
for final installation.
*ABOVE IMAGE REFERS TO KIT PN 2882242
PREPARATION
1. Place vehicle in “PARK”. Turn key to “OFF”
position and remove from vehicle.
2. Detach rubber latch
A
on both sides of vehicle
and open the front rack
B
.
3. Rotate two latches and remove storage tray
C
from vehicle as shown.
4. Disconnect the black (negative)
E
and red
(positive)
D
cables from the battery.
WARNING
ALWAYS
disconnect black negative (-) cable from
battery
FIRST
. Failure to do so will result in high
current electrical arc, and may result in battery
explosion if tool touches grounded frame. Death or
serious personal injury may occur.
