Polaris msx 110 Скачать руководство пользователя

Страница: 13 / 121

SAFETY

Safety Decals

Collision Avoidance Warning Decal

This decal is located on the glove box/console storage
lid at the helm of your watercraft.

Collision Avoidance Warning Decal Text:

Collisions result in more

INJURIES AND DEATHS

than any

other type of accident for personal watercraft (PWC).

TO AVOID COLLISIONS:

SCAN CONSTANTLY

for people, objects and other watercraft.

Be alert for conditions that limit your visibility or block your vision

of others.

OPERATE DEFENSIVELY

at safe speeds, and keep a safe dis-

tance away from people, objects and other watercraft.

Do not follow directly behind PWCs or other boats.

Do not go near others to spray or splash them with water.

Avoid sharp turns or other maneuvers that make it hard for

others to avoid you or understand where you are going.

Avoid areas with submerged objects or shallow water.

TAKE EARLY ACTION

to avoid collisions. Remember, PWCs

and other boats do not have brakes.

DO NOT RELEASE THROTTLE WHEN TRYING TO STEER

away from objects -- you need throttle to steer. Always check

throttle and steering controls for proper operation before starting

PWC.
Follow navigation rules and all state and local laws that apply to

PWCs.
See Owner’s Manual for more information.

https://www.boat-manuals.com/

Содержание msx 110


























































































































Результаты поиска

Содержание msx 110

Отзывы:

Похожие инструкции для msx 110

Бренды по названию

Популярные бренды

Polaris msx 110, Руководство владельца по обслуживанию и безопасности

Результаты поиска

Содержание msx 110

Отзывы:

Похожие инструкции для msx 110

Бренды по названию

Популярные бренды