B. IPOD & USB Cable
1. Remove glove box - gently
push in sides to release.
13. Plug harness back into
instrument cluster panel and
remount.
2. Unclip OEM USB and AUX
cable for now, so that you can
remove the glove box
completely.
3. Feed RW50/15 USB cable
from top section down into
the glove box area
C. External Antenna
14. Reinstall trim.
NOTE: please make sure the
bottom section of the trim
goes underneath the two
reset dials.
12. Connect plug
C
into OEM
plug located in the
TOP SECTION and connect plug
D
into the OEM plug located in
the OEM CD housing area
7
We no longer recommend mounting the GPS Antenna underneath the dashboard; please
mount it on top of the dash in the right /left top corner near the windscreen.
BT50-Installation-Guide-V3 (2020) 10/03/20 3:13 pm Page 7