Polaris MATRIX 650 INDY VR1 129 Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 243

Polaris MATRIX 650 INDY VR1 129 Скачать руководство пользователя страница 46

RIDER INFORMATION CENTER

The rider information center is located in the instrument cluster. The center
displays vehicle speed, engine speed, odometer, resettable trip meters (2), total
engine hours of operation, fuel level, engine temperature, and a diagnostic
display mode.

Setting changes must be made with the engine running or with the vehicle
powered by an external DC power supply connector. The information center is
set to display standard units of measurement for distance and temperature.

q

Information Display Area

- This area displays either engine speed or vehicle

speed (whichever is not displayed in the speed display), engine temperature and
maximum vehicle speed.

w

Speed Display

- The speed display area displays either vehicle speed or

engine speed.

e

Fuel Gauge

- Not available on all models. The segments of the fuel gauge

show the level of fuel in the fuel tank. When the last segment clears, a low fuel
warning is activated. All segments including the fuel icon will flash. Refuel
immediately.

NOTICE

The low fuel indicator and fuel level gauge on the Standard Instrument Cluster

are not supported on models with a fuel level gauge on the fuel cap.

44

«
...
44
45
46
47
48
...
»

Содержание MATRIX 650 INDY VR1 129




















































































































































































































































Отзывы:

Нет отзывов