Polaris MATRIX 650 INDY VR1 129 Скачать руководство пользователя страница 121

Страница: 121 / 243

ENGINE STOP SWITCH ALIGNMENT

1. Slightly loosen the set screw

the bottom of the housing.

2. Move the switch to the desired

position.

3. Tighten the screw to specification.

Do not over-torque.

CAUTION

The stop switch must be positioned in an easily accessible location.

TORQUE

Stop Switch Set Screw

12 in-lbs (1.4 N·m)

HANDLEBAR ANGLE ADJUSTMENT

CAUTION

Take care to avoid damaging hand warmer/brake switch wires when moving

components.

1. Securing the handlebar clamp bolts

with an Allen wrench, loosen each of
the four nuts.

2. Adjust the handlebar forward or

rearward to the desired angle.

3. Be sure the handlebar, brake lever

and throttle lever operate smoothly
and do not hit the gas tank,
windshield or any other part of the
machine when turned fully to the left
or right. If necessary, adjust the left
and right hand controls.

119

THE PERFECT FIT

Содержание MATRIX 650 INDY VR1 129




















































































































































































































































Результаты поиска

Содержание MATRIX 650 INDY VR1 129

Отзывы:

Polaris MATRIX 650 INDY VR1 129, Руководство пользователя, Страница: 121 / 243

Результаты поиска

Содержание MATRIX 650 INDY VR1 129

Отзывы: