Polaris Easy Cast, Инструкция по эксплуатации, Страница: 20 / 42

18
In order to avoid accidents, it is really important to follow the following instructions
during the installation and fixing of equipment. All steps are explained in detail:
Unboxing
Having received the device, make sure that the main box is sealed and intact.
Otherwise, inform the after-sales service department of Polaris, or its authorized
representatives.
How to move the device
The device should be moved as follows:
1.Unplug the system from the power supply
2.Empty the water tank
3.Keep the product in an upright position throughout the displacement. For
safety and prevention of accidents resulting from non-observance of technical
recommendations, see Section 4.2.
Environmental circumstances
It is important to choose an appropriate environment during installation
and operation for personal safety, correct operation and long lifetime. This
environment not only should be big enough but also should be on enough, have
proper ventilation and should be kept away from dust and direct sunlight. It
should be noted that the device must be placed in a way, so that the connections
may be managed easily.
Workplace temperature: 0-40OC
Maximum humidity: 75%
Failure to follow the aforementioned instructions results in device
being damaged, and Polaris Co, won’t be held liable.
The device should not be used in a place where there is danger of
explosion or firing
Transportation and installation