Instr 9928521
Rev 01 2017-07
Page 7 of 8
d. Continue routing GRAY wire speaker harness
a
inboard along existing vehicle routing, then
forward into center console. Secure harness to
existing vehicle routing clamp using one cable
tie
s
.
NOTE
Same cable tie shown in two different views. First
view looking forward and inboard from right rear
wheel well; second view looking rearward and
downward through engine access panel.
e. Repeat Steps a. through d. for LH speaker
assembly
q
and WHITE wire speaker harness
a
.
f.
Route both white and gray speaker harnesses
a
forward through center console, following
battery cables, then up into upper dash
compartment to amplifier.
Secure speaker harnesses to battery cables
using seven cable ties
s
.
NOTE
White harness routing shown; gray harness routing
similar.
