Instr 9927803
Rev 02 2017-03
Page 3 of 3
INSTALLATION INSTRUCTIONS
1. Shift vehicle transmission into “PARK”. Turn key to
“OFF” position and remove from vehicle.
2. Gain access (as required; see instructions
included with audio accessory).
3. Join display connector 1C on audio adapter
harness
q
to appropriate AUDIO AMP connector
on RIDE COMMAND
™
Display Mount Harness
(included in accessory kit PN 2882069, or
equivalent).
See previous section,
HARNESS DETAIL
, for
connector identification.
IF you are connecting
this accessory (sold
separately):
THEN join display
connector 1C to:
Audio Pod Kit (PN
2881227, 2882304), Door
Panel Speaker Amplifier
Kit (PN 2882122), or
equivalent
AUDIO AMP 1 or
AUDIO AMP 2
Subwoofer Kit (PN
2882063) or equivalent
AUDIO AMP 3
NOTE
AUDIO AMP 1, AUDIO AMP 2, and AUDIO AMP 3
connectors are located in the upper dash
compartment.
AUDIO AMP 1 and AUDIO AMP 2 connectors are
interchangeable.
4. Join
REMOTE ON
bullet connector 1A and
AUDIO
OUT
connector 1B on audio adapter harness
q
to
corresponding connectors on accessory.
5. Restore access.
FEEDBACK FORM
A feedback form has been created for the installer to provide any comments, questions
or concerns about the installation instructions. The form is viewable on mobile devices
by scanning the QR code or by clicking
if viewing on a PC.
FEEDBACK FORM
