Instr 9927473
Rev 01 2016-12
Page 7 of 13
TORQUE
16ft. lbs. (21.7 Nm)
5. Install the autostop fairlead mounting bracket to
the front suspension bracket
W
and chassis
bracket
X
using four screws
k
and nuts
2@
.
Torque to specification.
TORQUE
20ft. lbs. (27.1 Nm)
6. Feed the winch rope
i
through fairlead mounting
bracket
f
, autostop fairlead
s
, and rubber stop
h
as shown. Install winch hook
y
to rope
i
using
clevis and cotter pin.
HINT:
Attach a plastic cable
tie to the end of the rope and feed the cable tie
through the rubber stop. Use a little wax or other
mild lubricant on the rubber stop and pull the rope
through the rubber stop using the plastic cable tie.
CONTACTOR INSTALLATION
1. Align contactor mounting holes with existing four
holes on firewall
Z
and install contactor
i
on
firewall using four screws
y
. Tighten until snug but
do not overtighten.
2. Connect blue
w
, yellow
q
, red
r
, and black
e
cables to the contactor terminals as shown and
torque nuts to specification.
