Instr 9927083
Rev 01 2016-07
Page 2 of 2
INSTALLATION INSTRUCTIONS
1. Assemble LOCK & RIDE
®
anchors properly into
each of the four mounting locations.
a. Insert T-slot anchor (A) through rubber bushing
(B).
b. Insert T-slot anchor with bushing through base
of storage bag mounting bracket (C).
c. Place both washers (D) onto top of T-slot
anchor (A).
d. Place dowel pin (E) through opening in T-slot
anchor.
e. Fully clip LOCK & RIDE
®
handle (F) into dowel
pin (E).
2. Place storage bag
q
onto tunnel and place T-slot
anchor base into tunnel slot.
3. Rotate LOCK & RIDE
®
handle (F) so that T-slot
anchor is perpendicular to tunnel slot.
NOTE
Handles always need to be pulled over towards
center of the tunnel as shown.
IMPORTANT
• Do not carry sharp or pointed objects inside the
bag.
• Maximum carrying capacity is 10 lbs. (4.5 kg).
