background image

127

WARRANTY

Limitations of warranties and remedies

ALL IMPLIED WARRANTIES (INCLUDING BUT NOT LIMITED TO THE 
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PAR-
TICULAR PURPOSE) ARE LIMITED IN DURATION TO THE ABOVE ONE YEAR 
WARRANTY PERIOD. POLARIS FURTHER DISCLAIMS ALL EXPRESS WAR-
RANTIES NOT STATED IN THIS WARRANTY. Some states do not allow limitations 
on how long an implied warranty lasts, so the above limitation may not apply to you if 
inconsistent with controlling state law.

How to Obtain Warranty Service

If your snowmobile requires warranty service, you must take it to a POLARIS dealer 
authorized to repair POLARIS snowmobiles. When requesting warranty service you 
must present your copy of the Warranty Registration form to the dealer. (The cost of 
transportation to and from the dealer is YOUR responsibility). POLARIS recommends 
that you use your original selling dealer; however, you may use any POLARIS Servicing 
Dealer to perform warranty service.

Please work with your dealer to resolve any warranty issues. Your dealer will contact the 
appropriate personnel at POLARIS if additional assistance is needed.

This warranty gives you specific legal rights, and you may also have other rights which 
vary from state to state.

If any of the above terms are void because of state or federal law, all other warranty 
terms will remain in effect.

Engine Oil

1. Mixing oil brands or using non-recommended oil may cause engine damage. We rec-
ommend the use of POLARIS engine oil.

2. Damage resulting from the use of non-recommended lubricants may not be covered 
by warranty.

Содержание 2011 600 IQ Shift















































































































































Отзывы: