Polaris 2007 Dragon Скачать руководство пользователя страница 6

Страница: 6 / 137

TABLE OF CONTENTS

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

This section contains helpful information for owners and drivers and

illustrates the location of important identification numbers that should

be recorded in the owner's manual.

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

This section describes safe vehicle operation and identifies warning

decals and their locations.

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

This section identifies the locations of your snowmobile's controls and

features.

The Perfect Fit . . . . . . . . . . . . . . . . . . . . . . . . . 39

This section explains how to tailor the suspension and other features for

an optimum riding experience.

Pre-Ride Inspections . . . . . . . . . . . . . . . . . . . . 54

This section explains procedures that must be performed before riding.

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

This section explains proper engine break-in, operation of features and

general operating procedures.

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

This section defines your role, and your dealer's role, in your snowmo-

bile's regular maintenance.

Polaris Products. . . . . . . . . . . . . . . . . . . . . . . 114

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 115

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

Maintenance Log . . . . . . . . . . . . . . . . . . . . . . 129

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132

Содержание 2007 Dragon










































































































































Результаты поиска

Содержание 2007 Dragon

Отзывы:

Polaris 2007 Dragon, Руководство пользователя, Страница: 6 / 137

Результаты поиска

Содержание 2007 Dragon

Отзывы: