Polaris 2007 Dragon страница 125 Скачать руководство пользователя

Страница: 125 / 137

122

WARRANTY

Limited Warranty

Polaris Sales Inc., 2100 Highway 55, Medina, MN 55340, provides a ONE YEAR LIM-

ITED WARRANTY on all components of the Polaris snowmobile against defects in

material or workmanship. This warranty covers the parts and labor charges for repair or

replacement of defective parts that are covered by this warranty. The warranty begins on

the date of purchase. This warranty is transferable to another consumer, during the war-

ranty period, through a Polaris dealer.

Registration

At the time of sale, the Warranty Registration Form must be completed by your dealer

and submitted to Polaris within ten days. Upon receipt of this registration, Polaris will

record the registration for warranty. No verification of registration will be sent to the

purchaser as the copy of the Warranty Registration Form will be the warranty entitle-

ment. If you have not signed the original registration and received the customer copy,

please contact your dealer immediately. NO WARRANTY COVERAGE WILL BE

ALLOWED UNLESS THE SNOWMOBILE IS REGISTERED WITH POLARIS.

Initial dealer preparation and setup of your snowmobile is very important in ensuring

trouble-free operation. Purchasing a snowmobile in the crate or without proper dealer

setup will void your warranty coverage.

Warranty Coverage and Exclusions

Limitations of warranties and remedies

This warranty excludes any failures not caused by a defect in material or workmanship.

The warranty does not cover accidental damage, normal wear and tear, abuse or

improper handling. The warranty also does not cover any snowmobile that has been

structurally altered, neglected, improperly maintained, used for racing or used for pur-

poses other than for which it was manufactured. The warranty does not cover any dam-

ages that occur during trailer transit or as a result of unauthorized service or parts. In

addition, this warranty does not cover physical damage to paint or finish, stress cracks,

tearing or puncturing of upholstery material, corrosion or defects in parts, components

or the snowmobile due to fire, explosions or any other cause beyond Polaris' control.

This warranty does not cover the use of unauthorized lubricants, chemicals, or fuels that

are not compatible with the snowmobile.

The exclusive remedy for breach of this warranty shall be, at Polaris' exclusive option,

repair or replacement of any defective materials, or components or products. THE REM-

EDIES SET FORTH IN THIS WARRANTY ARE THE ONLY REMEDIES AVAIL-

ABLE TO ANY PERSON FOR BREACH OF THIS WARRANTY. POLARIS SHALL

HAVE NO LIABILITY TO ANY PERSON FOR INCIDENTAL, CONSEQUENTIAL

OR SPECIAL DAMAGES OF ANY DESCRIPTION, WHETHER ARISING OUT OF

EXPRESS OR IMPLIED WARRANTY OR ANY OTHER CONTRACT, NEGLI-

GENCE, OR OTHER TORT OR OTHERWISE. Some states do not permit the exclu-

sion or limitation of incidental or consequential damages or implied warranties, so the

above limitations or exclusions may not apply to you if inconsistent with controlling

state law.

Содержание 2007 Dragon










































































































































Результаты поиска

Содержание 2007 Dragon

Отзывы:

Похожие инструкции для 2007 Dragon

Бренды по названию

Популярные бренды

Polaris 2007 Dragon, Руководство пользователя

Результаты поиска

Содержание 2007 Dragon

Отзывы:

Похожие инструкции для 2007 Dragon

Бренды по названию

Популярные бренды