Polaris 2005 Edge Touring Скачать руководство пользователя страница 31

Страница: 31 / 153

FEATURES

Adjustable Seat Bucket

On models equipped with an

adjustable seat bucket (1), the

bucket can be adjusted forward

or rearward for rider comfort.

The seat bucket is removeable

for access to the under-seat

storage compartment.

Do not sit on the seat bucket.
Do not operate the snowmobile with the seat bucket removed.

WARNING

Operating or riding the snowmobile with the seat bucket removed

or while sitting on the seat bucket may cause loss of control or

ejection from the snowmobile, which could result in serious injury

or death. Never sit on the seat bucket, and always make sure

the seat bucket is securely installed before operating the

snowmobile.

Seat Bucket Adjustment

To adjust the seat bucket, press down on the release latch (2) and slide

the bucket forward or rearward to the desired position.

Make sure the

bucket locks firmly in position before operating the snowmobile.

Содержание 2005 Edge Touring


























































































































































Результаты поиска

Содержание 2005 Edge Touring

Отзывы:

Похожие инструкции для 2005 Edge Touring

Бренды по названию

Популярные бренды

Polaris 2005 Edge Touring, Руководство пользователя

Результаты поиска

Содержание 2005 Edge Touring

Отзывы:

Похожие инструкции для 2005 Edge Touring

Бренды по названию

Популярные бренды